tmc2008

Laboratory Tables & TableTop ™ Platforms Accessories 8 Technical Manufacturing Corporation • 978-532-6330 • 800-542-9725 (Toll Free) • Fax: 978-531-8682 • sales@techmfg.com • www.techmfg.com Armrests and Sliding Shelves Tables may be fitted with armrests and rigidly supported sliding side shelves just above the table top. The sliding shelves must be used in conjunction with a front support bar and a rear support bar that are fastened to the table legs. The bars can be retrofitted but cannot be used with the full perimeter enclosure or Faraday Cage. Front Support Bar This adjustable steel rail mounts on the table's front legs. It has a slot in which the shelves mount and is normally ordered with the armrest pads. The bar may be centered along the length of the table or cantilevered to suit your application. Rear Support Bar This adjustable rail mounts on the rear table legs and supports the rear end of the sliding shelves. It may also be cantilevered. Armrest Pads Adjustable leather forearm rests which fasten to the front support bar. A new armrest pad is now available which fastens to the perimeter enclosure. Sliding Shelves Shelves are made of wood with white plastic laminate covering all sides. A metal bracket on the front edge of the shelf fits into the slot in the front support bar. Shelves slide freely from side to side and are easily lifted off the support bars. Built-in stops prevent shelves from sliding out of slots. When ordering sliding shelves, you must order front and rear support bars. Raised Rear Shelf The 14 in. (350 mm) deep raised rear shelf mounts on the full perimeter enclo- sure and is the length of the corresponding table top. The shelf is solidly supported 18 in. (450 mm) above the isolated surface with no direct noise transmission to the table top. NOTE: This shelf cannot be used with the Faraday Cage. Clear Acrylic Enclosures The clear acrylic enclosure provides protection from drafts and dust. Custom configurations allow for acoustic and light protection. Features include: clear acrylic panels, solid top, and triple-track front section with a three-piece sliding front panel. Casters A set of four retractable casters with a total weight capacity of 1,000 lb (450 kg) can be mounted to the base of the table legs. Fixed Full-Perimeter Enclosures A fixed, welded-steel structure that com- pletely surrounds the table top to provide non-isolated support for Faraday Cages, raised rear shelves, Plexiglas enclosures, and other special fixtures. It cannot be used with sliding shelves or support bars. Precision Height Control Valves To minimize bottled air supply usage, stan- dard TMC height control valves have a small “dead band,” resulting in a height return accuracy of H110070.05 in. (H110071.3 mm). Precision valves control height to within H110070.005 in. (0.13 mm) but have a slight, constant leak. To specify precision height control valves with a table, add the letter “P” after the basic table model number. Precision valves may also be retrofitted to installed tables. Articulated ArmRest Our rugged, leather Articulated ArmRest adds stability and comfort when delicate manipulations must be made without disturbing the isolated surface. Mounts to front support bar or perimeter enclosure. Subshelf For additional storage space, a shelf mounted beneath the isolated table top is available and may be retrofitted at any time. How to order See Ordering Chart on page 9. (See following example.) Articulated Armrests ease microscope use. Example: To order a 30 in. x 48 in. (750 mm x 1,200 mm) table with a 2 in. (50 mm) thick stainless steel laminate top, front and rear support bars, two 10 in. (250 mm) wide shelves, and armrest pads, the following numbers are specified: 1 each 63-541 table 1 each 81-301-02 front support bar 1 each 81-302-02 rear support bar 2 each 81-312-02 10 in. (250 mm) shelf 2 each 81-303-01 armrest pad Note: You must specify quantity. Accessories

1 9Technical Manufacturing Corporation • 978-532-6330 • 800-542-9725 (Toll Free) • Fax: 978-531-8682 • sales@techmfg.com • www.techmfg.com TABLE MODEL 25 in. x 36 in. 30 in. x 30 in. 30 in. x 36 in. 30 in. x 48 in. 30 in. x 60 in. 36 in. x 48 in. 36 in. x 60 in. 625 x 900 mm 750 x 750 mm 750 x 900 mm 750 x 1200 mm 750 x 1500 mm 900 x 1200 mm 900 x 1500 mm Isolator frame only (no top) 63-510 63-520 63-530 63-540 63-540 63-560 63-560 Isolator with 2 in. stainless steel laminate 63-511 63-521 63-531 63-541 63-551 63-561 63-571 Isolator with 2 in. stainless steel and plastic laminate 63-512 63-522 63-532 63-542 63-552 63-562 63-572 Isolator with 4 in. CleanTop II, 1/4-20 on 1 in. spacing 63-533 63-543 63-553 63-563 63-573 Isolator with 100 mm CleanTop II, M6 on 25 mm 63-534 63-544 63-554 63-564 63-574 ACCESSORY MODEL Front support bar 81-301-01 81-301-00 81-301-01 81-301-02 81-301-03 81-301-02 81-301-03 Rear support bar 81-302-01 81-302-00 81-302-01 81-302-02 81-302-03 81-302-02 81-302-03 Armrest pads (front support bar) 81-303-01 for all tables (order 2) Armrest pads (perimeter enclosure and Faraday Cage) 81-303-02 for all tables (order 2) Articulated armrest 81-304-01 for all tables Articulated armrest adapter, front bar 81-305-01 for all tables Articulated armrest adapter, perimeter enclosure 81-306-01 for all tables Sliding shelf, 6 in.(150 mm) wide 81-311-01 81-311-02 81-311-02 81-311-02 81-311-02 81-311-03 81-311-03 Sliding shelf, 10 in. (250 mm) wide 81-312-01 81-312-02 81-312-02 81-312-02 81-312-02 81-312-03 81-312-03 Sliding shelf, 14 in. (350 mm) wide 81-313-01 81-313-02 81-313-02 81-313-02 81-313-02 81-313-03 81-313-03 Sliding shelf, 20 in. (500 mm) wide 81-314-01 81-314-02 81-314-02 81-314-02 81-314-02 81-314-03 81-314-03 Full perimeter enclosure, 2 in. (50 mm) tops 81-321-01 81-321-02 81-321-03 81-321-04 81-321-06 Full perimeter enclosure, 4 in. (100 mm) tops 81-322-03 81-322-04 81-322-06 Raised rear shelf 81-324-01 81-324-02 81-324-01 81-324-04 81-324-04 Subshelf 81-325-01 81-325-02 81-325-03 81-325-04 81-325-04 81-325-04 81-325-04 Sliding shelf for perimeter enclosure 81-327-03 81-327-04 81-327-04 81-327-04 81-327-06 Acrylic enclosure 81-328-03 81-328-04 81-328-06 Casters, set of 4 83-014-01 for all tables Table and Accessory Ordering Chart Order Number Nominal Table Size Price 90-510 25" x 36" Contact TMC 90-530 30" x 36" Contact TMC 90-540 30" x 48" Contact TMC 90-560 36" x 48" Contact TMC OnTrak Ordering Chart 1. Simply specify the “OnTrak” part number from the chart at right. 2. Contact TMC for pricing. 3. Be sure your table configuration includes caster set No. 83-014-01. How to Order Optional Feature NEW From TMC! OnTrak ™ An easy-to-use, roll-off option for 63-500 Tables that dramatically simplifies table rigging and installation. Features & Benefits No heavy lifting required TableTop ships pre-installed on isolator frame Casters required Reduces set-up time Simply roll table off skid and into final destination

978-532-6330800-542-9725TollFreewww.techmfg.com, in.mmin.mm, in.mmin.mm, thenpositionedtowithinH110070.001in.in, in.mmin.mm, in.mmin.mm, 978-532-6330800-542-9725TollFreewww.techmfg.com,
www.publitas.com, www.publitas.nl
tmc2008 main